Courses

Competent Person Scaffold Trianing
This course contains no sessions
Upon completion of this course, participants should be able to:

Explain the CHST exam requirements and pre-requisite skills

Explain the domain area covered in the exam

Assess their skills and knowledge of the material addressed in the exam Complete CHST Self-Assessments

Topics include: How to Study and Prepare for Certification Exams; CHST Math Review, CHST Examination, Professional Responsibility, Sample Questions Reveiw, CHST Self-Assessment Course Evaluation

Materials Required

Workbooks for this seminar are required and will be referenced throughout the study session. CHST Study Group books must be purchased prior to class and brought with the student. Click here to purchase the CHST Self Study Workbooks

Volume one of the workbooks covers the spectrum material that could possibly be tested. Volume two contain several home study self-evaluation sessions using the same question, answer and explanation format as in the workshop. The material included in the self-evaluation sessions is designed to supplement your home study program and reinforce those areas where emphasis is needed for the examination. The program will provide you with over 650 questions, answers and, more importantly, explanations.

Prerequisites:

Recommended: OSHA 500 Trainer Course in Occupational Safety adn Health Standards for Construction Industry

Learn more about the CHST Program


April 10, 2018 to April 11, 2018, Bryant Conference Center
October 3, 2018 to October 4, 2018, Bryant Conference Center
This online certificate program prepares you to audit and improve electrical safety programs, which is based on the annually required audit per the 2012 edition of NFPA 70E and OSHA Standards. The fee for this certificate program is $1,450.

You must decide if you want to do one elective or two.

(1) OSHA Electrical Requirements LESS THAN 600 VOLTS

(2) OSHA Electrical Requirements ABOVE 600 VOLTS

Online session available to start anytime!
Mandatory 2-hour course including a project of student teaching a topic for a 10 to 15-minute presentation required by the following certificate programs:

Electrical Safety Train-the-Trainer Qualified Electrical Worker, Electrical Safety Train-the-Trainer Unqualified Electrical Worker and Electrical Safety Auditor Certificate.


Online session available to start anytime!
This course explains how to develop an electrical safety checklist germane to your facility or plant. It includes the administration, documentation, and technical knowledge needed to design your checklist.

Prerequisites: None

Course includes:

1. How to develop and establish an electrical safety checklist for your facility or plant

2. Information to help you design your checklist

3. Standards required to develop your checklist

4. Details on developing a checklist

Cost: $100.00 if taken as an individual course.

This course is included in the curriculum of our online Electrical Safety Auditor Certificate Program.


Online session available to start anytime!
This online course explains six essential steps needed for any Electrical Safety Program. It includes the administration, documentation, and technical knowledge needed to design and maintain your electrical safety program.

Prerequisites: None

Course includes:

1. How to establish and audit your electrical safety policy and procedures

2. How to perform an arc flash hazard analysis and label your electrical equipment

3. How to apply and provide adequate Personal Protective Equipment (PPE) and insulated tools

4. Maintenance of equipment - the "nuts and bolts"

5. How to mitigate potential arc flash hazards

Cost: $150.00 if taken as an individual course.

This course is included in the curriculum of our online Electrical Safety Auditor Certificate Program.


Online session available to start anytime!
This class will cover the information that end-users will need to know about GHS-Hazcom training and management (Day one, half day session). The second part of this class (Day two) will provide learners with a more in-depth understanding of the GHS-Hazcom classification process. This is particularly useful for anyone with responsibilities for authoring SDS, auditing that process, or interacting with third parties providing that service. (Day two - full day session)
This course contains no sessions

Who should take these courses?

The online Health & Safety Management Certificate is geared toward employees who have been given the responsibility of health and safety on a part-time or full-time basis, but have no formal education in health and safety. It is also geared toward someone who has moved into health and safety management, or who wants to build a competency in health and safety to meet the requirements of the External Degree Program at The University of Alabama. In addition, the courses can be taken individually if someone needs an introduction or wants to develop a competency in a specific health and safety topic.

Description of the Certificate:

To earn the online Health & Safety Management Certificate, the student will need to complete FOUR core courses and SIX electives for a total of approximately 100 hours of online course time. Each course is approximately equal to 10 hours of classroom instruction time.

Core courses:

  • HSM 101 Introduction to OSHA (1.00 CEU)
  • HSM 102 Introduction to Workplace Safety (1.00 CEU)
  • HSM 103 Introduction to Industrial Hygiene (1.00 CEU)
  • HSM 104 Introduction to Workers' Compensation (1.00 CEU)

Elective courses of which you will choose only SIX (6)

  • HSM 202 Introduction to Mine Safety (1.00 CEU)
  • HSM 301 Managing Hazard Communication Programs (1.00 CEU)
  • HSM 310 Managing Ergonomic Programs (1.00 CEU)
  • HSM 311 Managing Personal Protective Equipment (PPE) Programs (1.00 CEU)
  • HSM 312 Managing Fleet Safety Programs (1.00 CEU)
  • HSM 701 Managing Bloodborne Pathogen Programs (1.00 CEU)
  • HSM 702 Managing Heat Stress Programs (1.00 CEU)
  • HSM 901 Managing Wellness Programs (1.00 CEU)
  • HSM 902 Managing Health Promotion (1.00 CEU)
  • HSM QEW 141 Understanding Basic Electricity for Electrical Safety (.40 CEU)

Electives will be developed based on demand for specific topics.

Computer and Internet Requirements: DSL, high-speed internet preferred.

Continuing Education Units (CEUs) will vary depending on electives chosen.

This program is available 24/7. ONCE YOU REGISTER, usually within three business days, you will be sent a user name, password and instructions. Then, you can start your course(s) at anytime. WORK AT YOUR OWN PACE


Online session available to start anytime!
This free one-day training program has been endorsed by leading construction associations throughout Alabama and Mississippi, including the Alabama Associated Builders and Contractors (ABC), Alabama and Mississippi Assoicated General Contractors (AGC), Home Builders Association of Alabama (HBAA) and the Alabama Office of the National Safety Council

Information presented in this training program is considered "essential knowledge" for anyone seeking work or contracting opportunities with any of Alabama's or Mississippi's major construction companies.

Topics Include: System Safety: What is a System?; How does it Work?; How does it apply to safety in the form of:

Fall Protection: Ladders, Scaffolds and Elevated Work / Roofing
This course contains no sessions

This course prepares students to understand basic electrical theorems as they apply to codes and standards. You will learn the theoretical intent of the electrical code-making body and understand the purpose of how electrical codes and standards are applied in real world situations.

NOTE: Online course available 24/7 and is WORK AT YOUR OWN PACE. Once you register, you will be sent a user name, password and instructions. Then you can start at anytime.


Online session available to start anytime!
This course presents students with detailed information on how to recognize and handle electrical hazards when working with less than 600 volts of electricity. Case studies with proven applications to electrical hazards are explained.

ELECTIVE Course for :

  • Qualified Electrical Worker Certificate
  • Electrical Safety Train-the-Trainer for Qualified Electrical Workers Certificate

NOTE: Online course available 24/7 and is WORK AT YOUR OWN PACE. Once you register, you will be sent a user name, password and instructions. Then you can start at anytime.


Online session available to start anytime!
This course presents students with detailed information on how to recognize and handle electrical hazards when working with above 600 volts of electricity. Case studies with proven applications to electrical hazards are explained.

ELECTIVE course for:

  • Qualified Electrical Worker Certificate
  • Electrical Safety Train-the-Trainer for Qualified Electrical Workers Certificate

NOTE: Online course available 24/7 and is WORK AT YOUR OWN PACE. Once you register, you will be sent a user name, password and instructions. Then you can start at anytime.


Online session available to start anytime!
This course trains students in the principles of electrical safety. The student will learn to identify potential electrical safety hazards and how to handle those hazards. The student will also be made aware of the workers' value as a part of the electrical task force or onsite authority having jurisdiction (AHJ).

NOTE: Online course available 24/7 and is WORK AT YOUR OWN PACE. Once you register, you will be sent a user name, password and instructions. Then you can start at anytime.


Online session available to start anytime!
This course trains students how to look up issues in the National Electrical Code quickly and accurately. Specific rules and definitions are explained concerning how to properly apply services, feeders, and branch circuits to real world applications. Students should fully know how to use the National Electrical Code for any application, as applied to electrical hazards and operations, when finished with this course.

NOTE: Online course available 24/7 and is WORK AT YOUR OWN PACE. Once you register, you will be sent a user name, password and instructions. Then you can start at anytime.


Online session available to start anytime!
This course covers the basic principles of grounding, bonding, and shielding and their use in protecting the electrical worker and others associated with the operation, installation, and construction of equipment.

NOTE: Online course available 24/7 and is WORK AT OWN PACE. Once you register, you will be sent a user name, password and instructions. Then you can start at anytime.


Online session available to start anytime!
This course provides the qualified electrical worker with information to properly use maintenance techniques and requirements that avoid potential electrical hazards. It specifically provides techniques to prevent shock and fire hazards associated with electrical equipment maintenance.

NOTE: Online course available 24/7 and is WORK AT YOUR OWN PACE. Once you register, you will be sent a user name, password and instructions. Then you can start at anytime.


Online session available to start anytime!
This course is valuable training for those who work with industrial machines, especially maintenance and construction personnel. This course makes the worker aware of deficiencies that should be corrected immediately to avoid potential electrical hazards.

NOTE: Online course available 24/7 and is WORK AT YOUR OWN PACE. Once you register, you will be sent a user name, password and instructions. Then you can start at anytime.


Online session available to start anytime!
This online certificate program prepares you to train designated Unqualified Electrical Workers (OSHA terminology) such as welders, pipe fitters, operators, etc. You will be able to train participants on how to recognize and respond safely to electrical hazards. This certificate program has two tracks:
  • (1) general - which includes pipe fitters, telecommunications, machine operators, and HVAC technicians limited, below 110 V
  • (2) welders (four hour course)
  • REQUIRED: Class Presentation Skills Course (two hours) AND Project - submit a 10 to 15 minute presentation of you teaching a topic in your chosen track(s) for review and critique. This can be accomplished via video or online -

    FEES:

    A. General - $300

    B. Welders - $300

    OTHER INFO:
  • Available 24/7
  • Work at own pace
  • Once registered, you will receive via email a user name, password and instructions to begin

  • Online session available to start anytime!